Product specs
Weight | 8.6 g |
---|---|
Dimensions | 33 × 13.5 × 8.3 mm |
Input Range | 8.3-14Vdc |
Output | 0.75-5Vdc |
Current | 10A, 16A |
Min-Max Tamb (°C) | -40°C, +85°C |
Weight | 8.6 g |
---|---|
Dimensions | 33 × 13.5 × 8.3 mm |
Input Range | 8.3-14Vdc |
Output | 0.75-5Vdc |
Current | 10A, 16A |
Min-Max Tamb (°C) | -40°C, +85°C |
K12T-10A, 16A series is a 10A, 16A non-isolated switching regulator. The output voltage is accurately adjustable from 0.75V to 5.0V and the product is featured with high efficiency, fast transient response, input under-voltage, output short circuit, over-current protection. They meet CLASS B of CISPR32/EN55032 EMI standards by adding the recommended external components and the are widely used in applications such as communications, computer network industry, power distributed architecture, work stations, servers, LANs/WANs and provide high current with fast transient response for high-speed chips such as FPGA, DSP and ASIC.
Notes: ① “P” indicates that the Ctrl pin is positive logic control, “N” indicates that the Ctrl pin is negative logic control;
② Exceeding the maximum input voltage may cause permanent damage;
③ The default output voltage is 0.75VDC, which can be adjusted to 1.2VDC, 1.8VDC, 2.5VDC, 3.3VDC, 5VDC. See Trim instructions for specific output voltage adjustment;
④ Unless otherwise specified, parameters in this table were measured under the 5VDC output voltage.